shade
Home/ Products/ Medium Pressure Hydraulic Hose/MP300

Medium Pressure Hose MP300 With Wide Range of IDs

Hydraulic hose Series MP300 provides an effective and economical solution for medium-pressure applications. It has excellent compatibility with gasoline, diesel, lubricating oils, water, and other petroleum hydraulic oils.

Reinforced by one braid steel wire and one braid textile, the reinforcement provides high working pressure up to 3000 psi as well as flexibility. This braided hose uses excellent oil resistant NBR tube and abrasive-proof cover which withstands oils, acids, ozone and other adverse factors encountered in working environment, is often a popular choice for medium working pressure hose.

Note: Not suitable for under-the-hood, vehicle and fuel hoses.

Hydraulic hose series MP300 description

Hydraulic hose with one braid of steel wire and one textile

Medium pressure hydraulic hose

Medium pressure hydraulic hose

Hydraulic hoses protected by natural rubber in case of excessive abrasion

Medium pressure hydraulic hose series MP300
Part Hose Size ID Hose OD Max. Working Pressure Min. Bend Radius Min. Burst Pressure Weight
in mm in mm psi MPa in mm psi MPa (lbs/ft.)
 MP300-04 1/4 6.4 0.582 14.8 3,000 20.7 3.4 86 12,000 82.7 0.18
 MP300-05 5/16 7.9 0.68 17.3 2,250 15.5 4 102 9,000 62.1 0.22
 MP300-06 13/32 10.3 0.78 19.8 2,000 13.8 4.6 117 8,000 55.2 0.23
 MP300-08 1/2 12.7 0.906 23 1,750 12.1 5.5 140 7,000 48.3 0.34
 MP300-10 5/8 15.9 1.077 27.4 1,500 10.3 6.5 165 6,000 41.4 0.41
 MP300-14 7/8 22.2 1.232 31.3 800 5.5 7.4 188 3,200 22.1 0.44
 MP300-18 1 1/8 28.6 1.5 38.1 625 4.3 9 229 2,500 17.2 0.53

Contact Form

You have a specific question or would you simply like to learn more about us?

Find our contact information below or use our Contact Form.